| Interval | City main (L/min) |
|---|---|
| 00:00 | 87 |
| 00:30 | 85 |
| 01:00 | 90 |
| 01:30 | 89 |
| 02:00 | 89 |
| 02:30 | 77 |
| 03:00 | 81 |
| 03:30 | 90 |
| 04:00 | 84 |
| 04:30 | 80 |
| 05:00 | 129 |
| 05:30 | 186 |
| 06:00 | 221 |
| 06:30 | 224 |
| 07:00 | 228 |
| 07:30 | 230 |
| 08:00 | 227 |
| 08:30 | 230 |
| 09:00 | 233 |
| 09:30 | 220 |
| 10:00 | 228 |
| 10:30 | 222 |
| 11:00 | 229 |
| 11:30 | 232 |
| 12:00 | 173 |
| 12:30 | 173 |
| 13:00 | 309 |
| 13:30 | 310 |
| 14:00 | 311 |
| 14:30 | 305 |
| 15:00 | 311 |
| 15:30 | 242 |
| 16:00 | 251 |
| 16:30 | 248 |
| 17:00 | 241 |
| 17:30 | 241 |
| 18:00 | 240 |
| 18:30 | 240 |
| 19:00 | 242 |
| 19:30 | 248 |
| 20:00 | 250 |
| 20:30 | 250 |
| 21:00 | 246 |
| 21:30 | 237 |
| 22:00 | 112 |
| 22:30 | 104 |
| 23:00 | 114 |
| 23:30 | 104 |
Real-time data for your factory.
Quantify Environmental installs permanent wireless sensors throughout your facility and brings all your data into one clear, real-time dashboard. After installation, we keep working with your team to find savings, solve problems, and improve day-to-day operations.
| Interval | Main incomer (kW) |
|---|---|
| 00:00 | 146 |
| 00:30 | 152 |
| 01:00 | 157 |
| 01:30 | 152 |
| 02:00 | 148 |
| 02:30 | 154 |
| 03:00 | 158 |
| 03:30 | 149 |
| 04:00 | 151 |
| 04:30 | 157 |
| 05:00 | 146 |
| 05:30 | 150 |
| 06:00 | 177 |
| 06:30 | 212 |
| 07:00 | 246 |
| 07:30 | 246 |
| 08:00 | 251 |
| 08:30 | 250 |
| 09:00 | 251 |
| 09:30 | 254 |
| 10:00 | 252 |
| 10:30 | 254 |
| 11:00 | 242 |
| 11:30 | 242 |
| 12:00 | 216 |
| 12:30 | 220 |
| 13:00 | 259 |
| 13:30 | 274 |
| 14:00 | 312 |
| 14:30 | 268 |
| 15:00 | 219 |
| 15:30 | 224 |
| 16:00 | 227 |
| 16:30 | 220 |
| 17:00 | 216 |
| 17:30 | 218 |
| 18:00 | 224 |
| 18:30 | 220 |
| 19:00 | 218 |
| 19:30 | 227 |
| 20:00 | 220 |
| 20:30 | 217 |
| 21:00 | 218 |
| 21:30 | 225 |
| 22:00 | 218 |
| 22:30 | 169 |
| 23:00 | 174 |
| 23:30 | 164 |
Trusted by leading organizations across Canada.
[TOM-REVIEW] Logo permissions are confirmed client by client before launch, and four of the twenty carry a caveat recorded in src/data/logos.js: Oberland's permission is oral and needs to be captured in writing, Miracle Valley's mark is our recolour of their white-only file, City of Guelph is a s.9 official mark whose slogan may not be cropped, and Biolab and Eden Valley are below our resolution bar pending a better file. Stellantis stays out: their published site terms forbid this use. The band renders ONLY roster entries with a cleared asset file, so no empty slot can ship.
Your entire facility on one screen.
An Energy Management Information System (EMIS) combines continuous utility (water, electricity, natural gas, and compressed air), equipment, and environmental data in a single interface, allowing your team to identify changes as they occur.
One unified dashboard.
Our platform works with the equipment and systems you already have. Existing meters, PLCs, SCADA historians, production databases and APIs can feed the same dashboard as our sensors, giving your team one place to see operational data.
| Source | Method |
|---|---|
| API | REST API |
| IoT devices | LoRaWAN |
| Wireless sensors | 900 MHz |
| Other systems | Modbus · existing PLC tag |
| Meters | pulse |
| Legacy equipment | 4-20 mA |
| Source | Method |
|---|---|
| API | REST API |
| IoT devices | LoRaWAN |
| Wireless sensors | 900 MHz |
| Other systems | Modbus · existing PLC tag |
| Meters | pulse |
| Legacy equipment | 4-20 mA |
- APIREST API
- IoT devicesLoRaWAN
- Wireless sensors900 MHz
- Other systemsModbus · existing PLC tag
- Meterspulse
- Legacy equipment4-20 mA
Edge computer900 MHz · LOCAL BUFFER
- Water
- Electricity
- Natural gas
- Compressed air
- Vibration
- Boiler
On your floor
One partner from the first site walk onward.
We design, source, configure and install the entire system ourselves. Most sensors are wireless, run for years on a battery and can be installed without stopping production. When you call later, you speak with the same people who installed them.
Wireless sensor · close-up [PHOTO]
Base station · factory behind [PHOTO]
The truck at the silos [PHOTO]
Compressors, chillers, boilers [PHOTO]
Antennas · 900 MHz [PHOTO]
Two ways our system pays for itself.
Production and process visibility
Utilities may start the conversation, but production visibility often creates the bigger opportunity. We monitor silo levels, vibration, product temperature, compressors and cooling towers—information many factories have never had continuously. It is also where predictive maintenance begins: finding a deteriorating bearing early enough to schedule the repair instead of reacting to a breakdown.
Utility and overhead reduction
We install permanent meters and sensors on water, electricity, natural gas and compressed air, then convert each reading into cost and GHG emissions. Minute-by-minute monitoring quickly reveals avoidable waste — often caused by schedules, setpoints, or equipment left running. Many of these fixes require little or no capital.
Nine places your factory may be losing money.
- 01
Water
At typical industrial water and sewer rates, a continuous 10 L/min leak can cost more than $15,000 per year.
Submetering helps isolate the source, and monthly reviews keep the corrective action moving.
- 02
Electricity
Demand charges can represent 30–40% of an industrial electricity bill.
Interval data shows when peaks occur and whether load shifting, peak shaving, or rescheduling offers the best return.
- 03
Natural Gas
Unnoticed operational changes quietly inflate heating bills 10–20%.
A monthly bill hides the cause; interval data shows when the baseload begins to rise.
- 04
Compressed Air
Leaks silently consume 20–30% of compressor output.
Continuous flow and pressure monitoring shows the leak load, helping your team prioritize repairs and verify the savings.
- 05
Silo & Material Level
Someone is still climbing the silo to check inventory levels.
Non-contact radar can replace the manual check with continuous readings and a low-level alert — reducing climbs and avoiding mid-shift shortages.
- 06
Vibration
A deteriorating bearing can change its vibration signature weeks before failure.
The change may be imperceptible on the floor but clear in the trend data.
- 07
Predictive Maintenance
At many factories, an hour of unplanned downtime can cost thousands, or tens of thousands, of dollars.
Early warning lets your team schedule the same repair during planned downtime instead of responding during a production failure.
- 08
Temperature & Humidity
A manual 6 a.m. round takes time and captures only one moment.
Continuous monitoring records temperature, humidity and humidex around the clock — and lets you check them from your desk, phone, or lunchroom TV.
- 09
Process Monitoring
Operator experience identifies the question. Process data gives the team evidence to act on.
Track cycle counts, runtime, firing rate, and product temperature—the operating details a utility bill cannot show.
What can we measure?
We can source, install or integrate almost any industrial sensor or meter.
- PressureLine, header and vessel pressure, continuously.
- TemperatureProduct, ambient and asset, NIST probes where it matters.
- HumidityRelative humidity in rooms, coolers and dry stores.
- VibrationThree-axis, on motors, pumps, fans and gearboxes.
- LevelSilos, tanks and totes, without the ladder.
- FlowWater and liquid flow on the main and every sub-user.
- pHEffluent, process water and CIP returns.
- Total suspended solidsWhat your wastewater surcharge is actually priced on.
- Air qualityParticulate, carbon dioxide, carbon monoxide and more.
- Water qualityConductivity, dissolved oxygen and ORP alongside pH.
- Energy and powerMains and sub-users, current draw, demand peaks.
- Compressed airFlow and pressure, so leak load stops being a guess.
- Analog signals4-20 mA, 0-10 V, pulse and dry contact.
- Process operationsRuntime, cycles and the numbers a bill never shows.
- Predictive maintenanceCatch the bearing on a Saturday, not on a Tuesday.
- Asset monitoringWhere it is, whether it moved, whether it is open.
Funding
Funding may cover part of your project.
Utilities and governments may fund part of an energy, water or monitoring project. We help your team identify relevant programs, connect with the right agencies and prepare the information needed to apply. Here are three current opportunities for Canadian manufacturers.
Enbridge Gas: Industrial Custom Program
Enbridge Gas (Ontario)
AmountManufacturing: $0.30/m³ of annual gas saved for the first 50,000 m³, then $0.20/m³; capped at 75% of incremental project costs to a maximum of $250,000 per project
Custom incentives and engineering support for industrial natural-gas efficiency retrofits (boilers, heat recovery, steam systems, process heating and similar projects) paid per cubic metre of gas saved.
What this covers Updated
Save on Energy: Retrofit Program
IESO (Independent Electricity System Operator), Ontario
AmountUp to 50% of eligible project costs; Custom stream pays $1,800/kW or $0.20/kWh, whichever is higher; Prescriptive industrial EMIS pays $50,000 (facilities up to 400,000 GJ/yr) or $250,000 (above 400,000 GJ/yr); double incentive rates available in electricity-constrained regions (still capped at 50%)
Incentives for electricity-saving upgrades at industrial and commercial facilities (HVAC/chillers, lighting and controls, variable-speed drives, manufacturing equipment and solar PV) via prescriptive (set) and custom (measured-savings) streams. The prescriptive stream also funds installation of an industrial Energy Management Information System (EMIS), i.e. the metering and monitoring layer itself.
What this covers Updated
Ontario Made Manufacturing Investment Tax Credit (and Expanded OMMITC)
Government of Ontario
Amount10% base rate (up to $2M/year); enhanced 15% rate for expenditures May 15, 2025 – Dec 31, 2029 (up to $3M/year), on up to $20M of eligible expenditures per taxation year. The CCPC credit is refundable; the Expanded OMMITC for non-CCPCs is a 15% NON-refundable credit.
A corporate income tax credit on capital investments in Ontario manufacturing, Class 53/43 machinery and equipment used in manufacturing or processing, and Class 1 buildings used for manufacturing or processing. Refundable for CCPCs; the expanded credit for non-CCPCs is non-refundable.
What this covers Updated
TYF · Text Your Factory
Ask your factory. It answers.
Ask a question in plain language and get a clear answer based on the same live data shown in your dashboard. TYF turns facility data into a response your team can understand and act on.
Typical questions you can ask TYF
- “What was the water use in my facility last week, day by day?”
- “Is my compressor running well?”
- “Do a water balance.”
What was the water use in my facility last week, day by day?
Weekdays run about 40 m³. Saturday and Sunday still came in at22 and 19 m³ with the factory down. That is baseline flow, not production.
News
Latest News from Quantify Environmental
- We ran the Industrial IoT session a second timeFour weeks after the first one, we ran the Industrial IoT webinar again on 29 November 2023, with more time spent on the questions the first session ran out of room for.
- The webinar we ran on Industrial IoT in manufacturingOn 1 November 2023 we ran a free hour on what Industrial IoT and AI actually change on a factory floor, and what they do not. Here is what we covered.
- What we heard at MeatEx in TorontoNotes from the floor: what processors asked about, what surprised them, and the one question that came up at almost every conversation.
What our clients say.
…immediate annual savings of over $150,000…
…unprecedented visibility…
I’ve never seen a system this good.
Start with a walk around your facility.
We spend an hour on the floor with your team, review your recent utility bills and identify what is worth measuring first — including any funding that may apply.
Book a site visitSee the platform
or call 1-833-QUANTFY (1-833-782-6839)











